PULL HANDLES

Pull Handles come as a back to back pair unless otherwise stated. Suitable for all joinery. Single handles are available but due to the weight we recommend a rear fixing. Escutcheons and turns are also available under other. See Technical for more information. All of our handles are solid bronze, made and designed in New Zealand.

SLAB PULL HANDLE 

Suitable for all joinery, good for narrow style frames with a minimum back set of 30 mm. Available in 2 sizes.

OFFSET D PULL HANDLE

Suitable for all joinery. Minimum 30 mm back set.

STRAIGHT PULL HANDLE

Our Straight Pull handle comes in 3 different sizes, with a complimentary Slim Straight range which can be used on less prominent doors or windows and cabinetry. We recommend a back set of 40 mm. Suitable for all joinery. 

FLAX PULL HANDLE

The Flax Pull handle is a lineal design and requires a minimum back set 57 mm. For double doors we recommend a 65mm back set. If minimum backset is not possible our Offset Plates can be used.  Suitable for all joinery.   

MALIBU PULL HANDLE 

A lineal design that requires a minimum back set of 57mm. For double doors we recommend a 65mm back set. If this is not possible use our Offset Plates. Suitable for all joinery. 

WAVE PULL HANDLE

Wave handles come in 4 sizes. Wave handles are handed, with the belly facing towards the hinges. Allowing more finger room from the door edge. Minimum back set 57mm. Suitable for all joinery. 

SPRAT PULL HANDLE

Our Sprat Pull Handle comes in 5 different sizes. Recommended back set of 57mm. Suitable for all joinery. 

LEVER HANDLES

Our Lever Handles are available on Long Plates and Roses. Levers on Long Plates are available as passage sets or can be machined for Euros, Oval, Turn and Emergency functions. Unless otherwise specified our Lever Handles come with 8mm spindles. Roses have horizontal fixings at 40.5mm. Minimum backset for Roses is 57mm. Minimum backset for Long Plates is 30mm. Long Plates can also be ordered with a 4 point action. Lever Handles come as a back to back pair unless otherwise specified.

STRAIGHT ENTRANCE LEVER

A minimum back set of 57mm is required. Suitable for 72mm and 85 mm euro locks. Vertical fixings are at 318mm, 8mm spindle. An integrated turn is also available. Suitable for steel, aluminium and timber joinery. 

FLAX LEVER

Spindle size 8 mm. Roses have horizontal fixings at 40.5 mm. Vertical fixings can be supplied on request. Minimum back set for roses is 57mm. Minimum back set for long plates is 30 mm. Long Plates can be ordered with the 4 Action Lock Mechanism. 

STRAIGHT LEVER

Spindle size 8mm. Roses have horizontal fixings at 40.5 mm. Vertical fixings can be supplied on request. Minimum back set for roses is 57mm. Minimum back set for long plates is 30 mm. Long plates can also be ordered with the 4 Action Lock Mechanism. 

WAVE LEVER HANDLE

Spindle size 8mm. Roses have horizontal fixings at 40.5mm. Vertical fixings can be supplied on request. Minimum back set for roses 57mm. Minimum back set for long plates 30 mm. Long plates can be ordered with the 4 Action Lock Mechanism. Fixings on longs plates are 12mm thick.

DRIFT LEVER HANDLE

Spindle size 8mm. Roses have horizontal fixings at 40.5mm. Vertical fixings can be supplied on request. Minimum back set for roses 57mm. Minimum back set for long plates 30 mm. Long plates can be ordered with the 4 Action Lock Mechanism. Fixings on longs plates are 214mm.

SPRAT LEVER HANDLE

Spindle size 8mm. Roses have horizontal fixings at 40.5mm. Vertical fixings can be supplied on request. Minimum back set for roses 57mm. Minimum back set for long plates 30 mm. Long plates can be ordered with the 4 Action Lock Mechanism. Fixings on longs plates are 214 mm.

BOLTS

Our Bolts are suitable for both sliding and hinged doors. Solid Bronze - as always. Weather Proof Strikes are available for both.

FLIP BOLT

Flush mounted. Bolt offsets are available at 7.5, 12.5, 17.5 mm. Extension rods are available, these come with a 20mm bolt offset. The flip action provides a good grip. Offset measurements are taken from the door edge to the centre of the bolt. The Bolt is 5mm thick or 13mm round. 

SLIDE BOLT

Flush mounted. Can be installed on the face or edge of the door. Non-extended bolts can have an offsets of 10.5, 15.5 or 20mm. Extension rods are available with a 20mm bolt offset. Offset options are from door edge to centre of the bolt. Bolt is 5mm thick or 13mm round. 

SLIDERS

CABINET HANDLES

STRAIGHT 150 SLIM CABINET HANDLE

The Straight 150 Slim handles are designed as a rear fixed cabinet handle. In some light use situations they can be suitable as a back to back pair. 

STRAIGHT 280 SLIM CABINET HANDLE

The Straight 280 Slim handles are designed as a rear fixed cabinet handle. In some light use situations they can be suitable as a back to back pair. 

STRAIGHT SLIM KNOB 

The Straight Slim Knobs are designed as a rear fixed cabinet handle. In some light use situations they can be suitable as a back to back pair. 

WALL MOUNTED DOOR STOP 

Door Stops can either be wall or floor mounted. They are designed for simple installation. 

FLOOR MOUNTED DOOR STOP

WINDOW CATCHES

Our window catch may be used when the jam and sill are flush, or when they are perpendicular. It is compatible with weather seals and aluminium joinery. Different strikes are available. Catches can be mounted vertically or horizontally.

ESCUTCHEONS AND TURNS - 9mm

Escutcheons sit over a cylinder turn and are secured by a grub screw. Turns can be supplied with a 8mm or 5mm square spindle or a flat bar, depending on the lock type. 

PUSH PLATES

OFFSET PLATES