BOLTS
Our Bolts are suitable for both sliding and hinged doors. Solid Bronze - as always. Weather Proof Strikes are available for both.
FLIP BOLT
Flush mounted. Bolt offsets are available at 7.5, 12.5, 17.5 mm. Extension rods are available, these come with a 20mm bolt offset. The flip action provides a good grip. Offset measurements are taken from the door edge to the centre of the bolt. The Bolt is 5mm thick or 13mm round.
SLIDE BOLT
Flush mounted. Can be installed on the face or edge of the door. Non-extended bolts can have an offsets of 10.5, 15.5 or 20mm. Extension rods are available with a 20mm bolt offset. Offset options are from door edge to centre of the bolt. Bolt is 5mm thick or 13mm round.
SLIDERS
SLIDER 270
Suitable for aluminium and timber joinery, features a deep groove, overall thickness is 24mm including a 6mm flange ( can be milled lower if required )
EDGE PULL FINGER
Edge pull finger is designed to be used in the edge of pocket doors.
FLUSH PULL
Suitable for timber joinery with deep grip. Overall thickness 16mm including a 2 mm flange.