We would highly recommend Blacksand and consider their wonderfully unique range of hardware a great investment.
— Justine Boot

PULL HANDLES

Pull Handles come as a back to back pair unless otherwise stated. Suitable for all joinery. Single handles are available but due to the weight we recommend a rear fixing. Escutcheons and turns are also available under other. See Technical for more information. All of our handles are solid bronze, made and designed in New Zealand.


 Slab Pull Handle Product Image - bronze door handles made in New Zealand

SLAB PULL HANDLE 

Suitable for all joinery, good for narrow style frames with a minimum back set of 30 mm. Available in 3 sizes and custom engraving is available on request. 

 Dimensional Drawing Slab Pull Handle
 bronze pull hardware made in new zealand

OFFSET D PULL HANDLE

Suitable for all joinery. Minimum 30 mm back set.

 Dimensional Drawing Offset D Pull Handle
 bronze hardware made in new zealand

STRAIGHT PULL HANDLE

Our Straight Pull handle comes in 3 different sizes, with a complimentary Slim Straight range which can be used on less prominent doors or windows and cabinetry. We recommend a back set of 40 mm. Suitable for all joinery. 

 Dimensional Drawing Straight Pull Handle
 bronze pull handle made in New Zealand

FLAX PULL HANDLE

The Flax Pull handle is a lineal design and requires a minimum back set 57 mm. For double doors we recommend a 65mm back set. If minimum backset is not possible our Offset Plates can be used. All sizes have 130mm hole centers. Suitable for all joinery.   

 Dimensional Drawing Flax Pull Handle
 bronze door handle made in new zealand

MALIBU PULL HANDLE 

A lineal design that requires a minimum back set of 57mm. For double doors we recommend a 65mm back set. If this is not possible use our Offset Plates. All sizes have 130mm hole centers. Suitable for all joinery. 

 Dimensional Drawing Malibu Pull Handle
 bronze pull handle made in new zealand

WAVE PULL HANDLE

Wave handles come in 4 sizes. Wave handles are handed, with the belly facing towards the hinges. Allowing more finger room from the door edge. Minimum back set 57mm, posts are at 130mm centers. Suitable for all joinery. 

 Dimensional Drawing Wave Pull Handle
Everyone loves them. Nice finish, lovely colour and shape. Thanks very much!
— Steve Lubiana - Tasmania
 
 bronze pull handle made in new zealand

SPRAT PULL HANDLE

Our Sprat Pull Handle comes in 5 different sizes. Recommended back set of 57mm. Suitable for all joinery. 

 Dimensional Drawing Straight Pull Handle
 
 bronze door handle made in new zealand

DRIFT PULL HANDLE

Drift Pull Handle comes in 4 sizes, mixed pairs are available with some sizes. All sizes have a 130mm hole centers, minimum back set 57mm. Suitable for all joinery. 

 Dimensional Drawing Drift Pull Handle

LEVER HANDLES

Our Lever Handles are available on Long Plates and Roses. Levers on Long Plates are available as passage sets or can be machined for Euros, Oval, Turn and Emergency functions. Unless otherwise specified our Lever Handles come with 8mm spindles. Roses have horizontal fixings at 40.5mm. Minimum backset for Roses is 57mm. Minimum backset for Long Plates is 30mm. Long Plates can also be ordered with a 4 point action. Lever Handles come as a back to back pair unless otherwise specified.


 bronze hardware made in new zealand

STRAIGHT ENTRANCE LEVER

A minimum back set of 57mm is required. Suitable for 72mm and 85 mm euro locks. Vertical fixings are at 318mm, 8mm spindle. An integrated turn is also available. Suitable for steel, aluminium and timber joinery. 

 Dimensional Drawing Straight Entrance Lever

Dimensional Drawing Straight Entrance Lever

 bronze lever handle made in new zealand

FLAX LEVER

Spindle size 8 mm. Roses have horizontal fixings at 40.5 mm. Vertical fixings can be supplied on request. Minimum back set for roses is 57mm. Minimum back set for long plates is 30 mm. Long Plates can be ordered with the 4 Action Lock Mechanism. 

 Dimensional Drawing Flax Lever
 bronze door handle made in new zealand

STRAIGHT LEVER

Spindle size 8mm. Roses have horizontal fixings at 40.5 mm. Vertical fixings can be supplied on request. Minimum back set for roses is 57mm. Minimum back set for long plates is 30 mm. Long plates can also be ordered with the 4 Action Lock Mechanism. 

 Dimensional Drawing Straight Lever
 bronze door handle made in new zealand

WAVE LEVER HANDLE

Spindle size 8mm. Roses have horizontal fixings at 40.5mm. Vertical fixings can be supplied on request. Minimum back set for roses 57mm. Minimum back set for long plates 30 mm. Long plates can be ordered with the 4 Action Lock Mechanism. Fixings on longs plates are 12mm thick.

 Dimensional Drawing Wave Lever

Dimensional Drawing Wave Lever

ITS HERE and its BEAUTIFUL!!! I am so thrilled, thankyou.
— Vicki Biddle - Whangarei
 
 bronze door handle made in new zealand

DRIFT LEVER HANDLE

Spindle size 8mm. Roses have horizontal fixings at 40.5mm. Vertical fixings can be supplied on request. Minimum back set for roses 57mm. Minimum back set for long plates 30 mm. Long plates can be ordered with the 4 Action Lock Mechanism. Fixings on longs plates are 214mm.

 Dimensional Drawing Drift Lever
 bronze hardware made in new zealand

SPRAT LEVER HANDLE

Spindle size 8mm. Roses have horizontal fixings at 40.5mm. Vertical fixings can be supplied on request. Minimum back set for roses 57mm. Minimum back set for long plates 30 mm. Long plates can be ordered with the 4 Action Lock Mechanism. Fixings on longs plates are 214 mm.

 Dimensional Drawing Sprat Lever Handle

BOLTS

Our Bolts are suitable for both sliding and hinged doors. Solid Bronze - as always. Weather Proof Strikes are available for both.


 bronze bolts made in new zealand

FLIP BOLT

Flush mounted. Bolt offsets are available at 7.5, 12.5, 17.5 mm. Extension rods are available, these come with a 20mm bolt offset. The flip action provides a good grip. Offset measurements are taken from the door edge to the centre of the bolt. The Bolt is 5mm thick or 13mm round. 

 Dimensional Drawing Flip Bolt
 bronze bolts made in new zealand

SLIDE BOLT

Flush mounted. Can be installed on the face or edge of the door. Non-extended bolts can have an offsets of 10.5, 15.5 or 20mm. Extension rods are available with a 20mm bolt offset. Offset options are from door edge to centre of the bolt. Bolt is 5mm thick or 13mm round. 

 Dimensional Drawing Slide Bolt
 

SLIDERS


On the behalf of Al-Fayad Carpentry & Decoration, I want to thank Blacksand Bronze and you for your lovely items and for its quality. Hope we will have further jobs for you soon.
— Fares N Fayad - Al Fayad
 Bronze sliding door handle made in new zealand

SLIDER 270 

Suitable for aluminium and timber joinery, features a deep groove, overall thickness is 24mm including a 6mm flange ( can be milled lower if required )

technical drawing slider.jpg
 
 bronze sliding door handle made in new zealand

EDGE PULL FINGER

Edge pull finger is designed to be used in the edge of pocket doors. 

Pocket slider pull.jpg
 
 bronze sliding door handle made in new zealand

FLUSH PULL

Suitable for timber joinery with deep grip. Overall thickness 16mm including a 2 mm flange.

Flush Pull Dim.jpg

CABINET HANDLES


 bronze cabinet handle made in new zealand

STRAIGHT 150 SLIM CABINET HANDLE

The Straight 150 Slim handles are designed as a rear fixed cabinet handle. In some light use situations they can be suitable as a back to back pair. 

 Dimensional Drawing Straight Slim Cabinet Handle
 bronze cabinet handle made in new zealand

STRAIGHT 280 SLIM CABINET HANDLE

The Straight 280 Slim handles are designed as a rear fixed cabinet handle. In some light use situations they can be suitable as a back to back pair. 

 Dimensional Drawing Large Straight Slim Cabinet Handle
 bronze cabinet handle made in new zealand

STRAIGHT SLIM KNOB 

The Straight Slim Knobs are designed as a rear fixed cabinet handle. In some light use situations they can be suitable as a back to back pair. 

 Dimensional Drawing Straight Slim Door Knob
 bronze door stop 

WALL MOUNTED DOOR STOP 

Door Stops can either be wall or floor mounted. They are designed for simple installation. 

 Dimensional Drawing Wall Mounted Door Knob
 bronze door stop

FLOOR MOUNTED DOOR STOP

 Dimensional Drawing Floor Mounted Door Stop
 bronze window catch made in new zealand

WINDOW CATCHES

Our window catch may be used when the jam and sill are flush, or when they are perpendicular. It is compatible with weather seals and aluminium joinery. Different strikes are available. Catches can be mounted vertically or horizontally.

 Dimensional Drawing Window Catch
 

ESCUTCHEONS AND TURNS - 9mm

Escutcheons sit over a cylinder turn and are secured by a grub screw. Turns can be supplied with a 8mm or 5mm square spindle or a flat bar, depending on the lock type. 

 bronze escutcheons and turns 
 

PUSH PLATES

 bronze push plates

Push plates come in two sizes, they can be face fixed for an interior mounting, or fixed from the rear with a through fixing when required to be on exterior side of the door. Rear fixed plates come with lugs to suit the various fixing positions of our handles.

 

OFFSET PLATES

 bronze offset plates

Offset plates increases the back set of our pull handles by 30mm. The handle posts are attached to the offset plates, the plates then use our standard back to back fixing method.